Press Feed Lines are electronically linked (with a programmable logic controller PLC) to an automatic feeder which feeds metal raw material through the die of the stamping press. The strip is fed into the automatic feeder after it has been uncoiled from a coil and put through a roller straightener or flattener. Generally, a loop is created prior to the stamping process so a constant rate of strokes per minute can be obtained on the stamping press.
Our current equipment include:
54” x .187” to .020”, 3.5” Diameter x 60,000# Herr Voss Feed Line, Inverted Drive
72” x .250” to .020” x 4/8” Diameter x 60,000# Cauffiel